Home › Showroom › Compare Models

Compare Models

2016 Bush Hog 3210 Lift / Semi-Mount in Purvis, Mississippi
Previous Next
2016 Bush Hog 3210 Lift / Semi-Mount
2016 Bush Hog 3210 Lift / Semi-Mount in Purvis, Mississippi
Previous Next
2016 Bush Hog 3210 Lift / Semi-Mount

Specs

General Information

Manufacturer
Bush Hog
Bush Hog
Model Year
2016
2016
Model
3210 Lift / Semi-Mount
3210 Lift / Semi-Mount
Model Code
3210LIFTSEMIMOUNT
3210LIFTSEMIMOUNT
Color
Red
Red

Dimensions

Weight
(Pull with Single Axle) 2,741-lbs.
(Pull with Single Axle) 2,741-lbs.
Width
11-feet 1-inch
11-feet 1-inch
Cutting Width
11-feet 1-inch
11-feet 1-inch
Cutting Height
2 to 13-inches
2 to 13-inches
Length
9-feet 10-inches
9-feet 10-inches

Measurements

Skirt Depth
Side Bands - 1/4-inch x 10-inches
Side Bands - 1/4-inch x 10-inches
Deck Thickness
10-gauge
10-gauge
Blade Size
1/2-inch x 4-inches – Uplift
1/2-inch x 4-inches – Uplift
Blade Overlap
3-inches
3-inches
Blade Tip Speed
16,881 FPM / 540 RPM; 17,400 / 1,000 RPM
16,881 FPM / 540 RPM; 17,400 / 1,000 RPM
Bladeholder/Carrier
Round
Round
Cutting Capacity
Up to 3-inches
Up to 3-inches

Operational

Tractor PTO Speed
540 / 1,000 rpm
540 / 1,000 rpm
Hitch
3-Point Cat. II & III Standard & Quick Hitch Cat. II & III Semi-Mount and Center Pull (Self-Leveling)
3-Point Cat. II & III Standard & Quick Hitch Cat. II & III Semi-Mount and Center Pull (Self-Leveling)
Driveline Protection
4 Plate PTO Slip Clutch
4 Plate PTO Slip Clutch
Tires
Laminated, Airplane (Pull Only)
Laminated, Airplane (Pull Only)
Main Shaft

Driveline - ASAE Category 5 (540 RPM – Lift, Pull & Semi-Mount); ASAE Cat. 4 (1,000 RPM Pull)

Cross Shaft - ASAE Cat. 5 Rubber Element

Driveline - ASAE Category 5 (540 RPM – Lift, Pull & Semi-Mount); ASAE Cat. 4 (1,000 RPM Pull)

Cross Shaft - ASAE Cat. 5 Rubber Element

Safety Features
Safety Tow Chain - Standard for Pull Models
Safety Tow Chain - Standard for Pull Models
Rear Deflector
Bands or Chains
Bands or Chains
Tractor Size
50 PTO (Pull); 60 PTO (Lift)
50 PTO (Pull); 60 PTO (Lift)
Gearbox HP Rating
(3) 210 hp Center and 205 hp Outboard
(3) 210 hp Center and 205 hp Outboard
Front Deflector & Foot Guard
Chains
Chains

Features

Construction Features

  • 10-gauge Deck Construction
  • 7-gauge Strongbacks
  • 1/4-inch Sidebands
  • Rubber Cushioned Axle Arms
  • 5 Year Gearbox Limited Warranty
  • Powder Coat Paint

Features

  • High Blade Tip Speeds
  • Deep Sidebands

Performance Features

  • 3210 Series comes in a Lift, Pull, Semi-Mount & Offset Model
  • Rubber Element Cross Shafts
  • Heavy Duty Cushioned Axles
  • Two Round Blade Holders
  • See Specifications Page For Models 3210 & 3210 Offset

Product Features

  • All Bush Hog® Multi-Spindle rotary cutters feature structural steel bracing and reinforced welding at all high stress points. Streamlined deck design inhibits trash and water buildup problems.
  • Special rubber-cushioned axle arms reduce shock loads during operation and transport.
  • Shields over all cross shafts fold conveniently out of the way to allow quick access to clutch or universal joints.
  • A wide angle, constant velocity driveshaft on pull models relieves the PTO working angle. This reduces vibration and allows smoother cutting in sharp turns.

Construction Features

  • 10-gauge Deck Construction
  • 7-gauge Strongbacks
  • 1/4-inch Sidebands
  • Rubber Cushioned Axle Arms
  • 5 Year Gearbox Limited Warranty
  • Powder Coat Paint

Features

  • High Blade Tip Speeds
  • Deep Sidebands

Performance Features

  • 3210 Series comes in a Lift, Pull, Semi-Mount & Offset Model
  • Rubber Element Cross Shafts
  • Heavy Duty Cushioned Axles
  • Two Round Blade Holders
  • See Specifications Page For Models 3210 & 3210 Offset

Product Features

  • All Bush Hog® Multi-Spindle rotary cutters feature structural steel bracing and reinforced welding at all high stress points. Streamlined deck design inhibits trash and water buildup problems.
  • Special rubber-cushioned axle arms reduce shock loads during operation and transport.
  • Shields over all cross shafts fold conveniently out of the way to allow quick access to clutch or universal joints.
  • A wide angle, constant velocity driveshaft on pull models relieves the PTO working angle. This reduces vibration and allows smoother cutting in sharp turns.