Home › Showroom › Compare Models

Compare Models

2016 Bush Hog 3414 Lift in Purvis, Mississippi
Previous Next
2016 Bush Hog 3414 Lift
2016 Bush Hog 3414 Lift in Purvis, Mississippi
Previous Next
2016 Bush Hog 3414 Lift

Specs

General Information

Manufacturer
Bush Hog
Bush Hog
Model Year
2016
2016
Model
3414 Lift
3414 Lift
Model Code
3414LIFT
3414LIFT
Color
Red
Red

Dimensions

Cutting Height Range
2 to 13-inches
2 to 13-inches
Weight
(Pull with Single Axle) 3,383-lbs.
(Pull with Single Axle) 3,383-lbs.
Width
14-feet, 7-inches
14-feet, 7-inches
Cutting Width
14-feet
14-feet
Length
9-feet, 1-inch
9-feet, 1-inch

Measurements

Skirt Depth
Side Bands - 1/4-inch x 10-inches
Side Bands - 1/4-inch x 10-inches
Deck Thickness
10-gauge
10-gauge
Blade Size
1/2-inch x 4-inches – Uplift
1/2-inch x 4-inches – Uplift
Blade Overlap
3-inches
3-inches
Blade Tip Speed
15,242 FPM
15,242 FPM
Bladeholder/Carrier
Straight or Round
Straight or Round
Cutting Capacity
Up to 2 1/2-inches Diameter
Up to 2 1/2-inches Diameter

Operational

Tractor PTO Speed
540 / 1,000 rpm
540 / 1,000 rpm
Hitch
3-Point Cat. II & III Standard & Quick Hitch and Center Pull (Self-Leveling)
3-Point Cat. II & III Standard & Quick Hitch and Center Pull (Self-Leveling)
Driveline Protection
4 Plate PTO Slip Clutch
4 Plate PTO Slip Clutch
Tires
Laminated, Airplane
Laminated, Airplane
Main Shaft

Driveline - ASAE Category 5 (540 RPM – Lift or Pull) ASAE Cat. 4 (1,000 RPM Pull)

Cross Shaft - ASAE Cat. 5 Rubber Element with Cat. 4 Shear Pin/Rubber Element

Driveline - ASAE Category 5 (540 RPM – Lift or Pull) ASAE Cat. 4 (1,000 RPM Pull)

Cross Shaft - ASAE Cat. 5 Rubber Element with Cat. 4 Shear Pin/Rubber Element

Safety Features
Safety Tow Chain - Standard for Pull Models
Safety Tow Chain - Standard for Pull Models
Rear Deflector
Rear Bands or Chains
Rear Bands or Chains
Tractor Size
90 hp PTO
90 hp PTO
Gearbox HP Rating
(3) 210 Center and 205 Outboard
(3) 210 Center and 205 Outboard
Front Deflector & Foot Guard
Front Belting
Front Belting

Features

Construction Features

  • 10-gauge Deck Construction
  • 7-gauge Strongbacks
  • Deep Sidebands
  • Rubber Cushioned Axle Arms
  • Round Blade Pan Or Straight Bar
  • 5 Year Gearbox Limited Warranty
  • Powder Coat Paint

Features

  • High Blade Tip Speeds
  • Deep Sidebands
  • Standard Highway Lighting

Performance Features

  • Rated for Min. 90 HP Tractors
  • Available With Row Crop Shredding Kit
  • Rubber Element Cross Shafts
  • Heavy Duty Rubber Cushioned Axles
  • High Blade Tip Speeds
  • Three Round Or Straight Blade Holders
  • Slip Clutch Standard

Product Features

  • Rubber cushioned axle arms are standard equipment on the 3414 model cutters and do an excellent job of absorbing shock loads when operating on rough terrain.
  • Wheel axles are attached by heavy duty pivot pins with replaceable bushings that extend through the cutter strongbacks. This dependable mounting arrangement provides extra strength and less pivot pin wear.

Safety Features

  • Standard Highway Lighting
  • Warning: For non-agricultural use, OSHA, ASAE, SAE and ANSI standards require the use of chain guards or other protective guards at all times. Bush Hog® strongly recommends the use of such guards for agricultural uses as well, to reduce the risk of property damage, serious bodily injury or even death from objects thrown out by or from contact with the cutting blades.

Construction Features

  • 10-gauge Deck Construction
  • 7-gauge Strongbacks
  • Deep Sidebands
  • Rubber Cushioned Axle Arms
  • Round Blade Pan Or Straight Bar
  • 5 Year Gearbox Limited Warranty
  • Powder Coat Paint

Features

  • High Blade Tip Speeds
  • Deep Sidebands
  • Standard Highway Lighting

Performance Features

  • Rated for Min. 90 HP Tractors
  • Available With Row Crop Shredding Kit
  • Rubber Element Cross Shafts
  • Heavy Duty Rubber Cushioned Axles
  • High Blade Tip Speeds
  • Three Round Or Straight Blade Holders
  • Slip Clutch Standard

Product Features

  • Rubber cushioned axle arms are standard equipment on the 3414 model cutters and do an excellent job of absorbing shock loads when operating on rough terrain.
  • Wheel axles are attached by heavy duty pivot pins with replaceable bushings that extend through the cutter strongbacks. This dependable mounting arrangement provides extra strength and less pivot pin wear.

Safety Features

  • Standard Highway Lighting
  • Warning: For non-agricultural use, OSHA, ASAE, SAE and ANSI standards require the use of chain guards or other protective guards at all times. Bush Hog® strongly recommends the use of such guards for agricultural uses as well, to reduce the risk of property damage, serious bodily injury or even death from objects thrown out by or from contact with the cutting blades.