Home › Showroom › Compare Models

Compare Models

2016 Bush Hog 2815 Flex Wing in Purvis, Mississippi
Previous Next
2016 Bush Hog 2815 Flex Wing
2016 Bush Hog 2815 Flex Wing in Purvis, Mississippi
Previous Next
2016 Bush Hog 2815 Flex Wing

Specs

General Information

Manufacturer
Bush Hog
Bush Hog
Model Year
2016
2016
Model
2815 Flex Wing
2815 Flex Wing
Model Code
2815FLEXWING
2815FLEXWING
Color
Red
Red

Dimensions

Height
Transport Height - 7-feet 3-inches
Transport Height - 7-feet 3-inches
Width
Transport Width - 8-feet 2-inches
Transport Width - 8-feet 2-inches
Cutting Width
15-feet
15-feet
Cutting Height
2-inches to 14-inches
2-inches to 14-inches

Measurements

Skirt Depth
1/4-inch x 12-inches
1/4-inch x 12-inches
Wing Flex Angle

Wing Flex: - 22° down / 87° up

Wing Free Float - 22° down / 45° up

Wing Flex: - 22° down / 87° up

Wing Free Float - 22° down / 45° up

Deck Thickness

Top Deck, Center Section - 11-gauge

Bottom Deck, Center - 7-gauge

Deck, Wings - 7-gauge

Top Deck, Center Section - 11-gauge

Bottom Deck, Center - 7-gauge

Deck, Wings - 7-gauge

Blade Size
1/2-inch x 4-inches
1/2-inch x 4-inches
Blade Tip Speed
16,289 FPM @ 540 PTO / 16,000 FPM @ 1000 PTO
16,289 FPM @ 540 PTO / 16,000 FPM @ 1000 PTO
Bladeholder/Carrier
Round
Round
Wing Flex Range
Turnbuckles
Turnbuckles
Cutting Capacity
4-inches diameter
4-inches diameter

Operational

Tractor PTO Speed
Minimum Tractor h.p. @ PTO - 60
Minimum Tractor h.p. @ PTO - 60
Hitch
Self Leveling, “Perma-Level”
Self Leveling, “Perma-Level”
Safety Features
Safety tow chain
Safety tow chain
Driveline -- Wing
ASAE Cat 4
ASAE Cat 4
Driveline -- Center
ASAE Cat 6
ASAE Cat 6
Tractor Size
Minimum Tractor h.p. @ PTO - 60
Minimum Tractor h.p. @ PTO - 60
Gearbox HP Rating

Splitter Gearbox Rating - 250 HP

Cutting Gearbox Rating - 225 HP

Splitter Gearbox Rating - 250 HP

Cutting Gearbox Rating - 225 HP

Features

Construction Features

  • Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.
  • Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.
  • All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.
  • Greaseable Axle Pivot Points with spring steel bushings
  • Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.
  • Powder Coat Paint

Performance Features

  • Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
  • Center section blades properly align with center wheels to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings at axle pivot points for longer life
  • Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
  • Optional grass/row crop baffles for improved distribution in grass and corn stalk shredding.

Product Features

  • The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
  • Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.

Safety Features

  • Improved design of wing sidebands means less damage caused by sideband-to-ground contact.

Construction Features

  • Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.
  • Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.
  • All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.
  • Greaseable Axle Pivot Points with spring steel bushings
  • Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.
  • Powder Coat Paint

Performance Features

  • Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
  • Center section blades properly align with center wheels to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings at axle pivot points for longer life
  • Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
  • Optional grass/row crop baffles for improved distribution in grass and corn stalk shredding.

Product Features

  • The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
  • Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.

Safety Features

  • Improved design of wing sidebands means less damage caused by sideband-to-ground contact.